Kingaroy Abattoir WTP – MMF, UF, RO

Problem: High Level of TDS, Chloride, Iron, Manganese.
Solution: Oxidization, MMF, UF, RO, Disinfection.
Kingaroy Abattoir WTP map
Background:
The Clients requirement was to use existing bore water as wash down, process and heat exchange water.
PWS designed and installed a packaged system to comply with the client’s requirements.

The Challenge:
To design, manufacture and install a 75T/Hr UF Membrane system, 50T/Hr RO system, including oxidisation for Iron and Manganese removal.

Parameter
Raw Water
Target
TDS
1600 – 2000 ppm
< 300 ppm
Chloride
600 – 900 ppm
< 250 ppm
Iron
7 – 9 ppm
< 0.5 ppm
Manganese
2 – 4 ppm
< 0.5 ppm

The Solution:
PWS designed, manufactured, installed and commissioned the water treatment plant.
Water is pumped from existing bores to a holding tank while dosing chlorine for oxidisation.
After sufficient contact time water is then pumped through the Multi-Media Filters, 10-micron bag filters and then the Ultra-Filtration system. UF Product water is then stored for use for wash down and process water.
The UF product water is also used as the feed water to the RO plant. The RO permeate is then stored in holding tanks to be used with heat exchangers to prevent scaling and corrosion.

The Results:
The water treatment plant delivers filtered water that meets or exceeds the customers requirements.
Kingaroy Abattoir WTP MMF, UF, RO-1
Kingaroy Abattoir WTP MMF, UF, RO-2

Parameter
Raw Water
Target
Result
TDS
1600 – 2000 ppm
< 300 ppm
18 ppm
Chloride
600 – 900 ppm
< 250 ppm
8 ppm
Iron
7 – 9 ppm
< 0.3 ppm
< 0.05 ppm
Manganese
2 – 4 ppm
< 0.5 ppm
0.002 ppm
Contact Us
PWS (Porat Water Solutions)
Phone: (03) 9768 7446
Email: porat@bigpond.com
Address: 35B Cambria Road, Keysborough, VIC, Australia 3173

Location