Moama Waters Caravan Park drinking water plant from Murray River

Problem: High Level of TSS, Turbidity, Colour and Organic Matter.
Solution: Coagulation/Settling, MMF, UF, Disinfection.
Moama Waters Caravan Park DWP map
Background:
The Clients requirement was to use the Murray River water supply as drinking water for the caravan park.
PWS designed and installed a packaged system to comply with the clients requirements and meet Australian Drinking Water Guidelines.

The Challenge:
To design, manufacture and install a 4T/Hr UF Membrane system, including suitable pretreatment and disinfection.

Parameter
Raw Water
Target
TSS
40 mg/L
Nil
Turbidity
140 NTU
< 1 NTU
Colour
110 Hu
< 15 Hu

The Solution:
PWS designed, manufactured, installed and commissioned the water treatment plant.
Water is pumped from the Murray River to a holding tank while dosing coagulant. After sufficient contact time water is then pumped through the Multi-Media Filters, 1micron Cartridge filters and the Ultra-Filtration systems and finally disinfected with chlorine.
The filtered water is then stored in drinking water tanks for use.

The Results:
Moama Waters Caravan Park DWP-1
Moama Waters Caravan Park DWP-2
The water treatment plant delivers filtered water that complies or exceed the Australian Drinking Water guidelines.

Parameter
Raw Water
Target
Result
TSS
40 mg/L
Nil
Nil
Turbidity
140 NTU
< 1 NTU
< 1 NTU
Colour
110 Hu
< 15 Hu
< 5 Hu
Contact Us
PWS (Porat Water Solutions)
Phone: (03) 9768 7446
Email: porat@bigpond.com
Address: 35B Cambria Road, Keysborough, VIC, Australia 3173

Location